DENSO Injector 095000-5600 | 1465A041 – Injection Performance and Engine Protection
A Common Rail injector designed for precise injection
L'’DENSO diesel injector 095000-5600 is an injector Common Rail electromagnetic designed to ensure the metering and atomization of fuel in the engine. It is also identified by the part numbers 1465A041 And DCRI105600. The technical sources consulted associate this reference with applications Mitsubishi, especially with the engine 4D56.
The injector is one of the most important components in the fuel system of a modern diesel engine. It must deliver the required amount of fuel with high precision and at the appropriate time to allow for efficient combustion.
The reference 095000-5600 belongs to the DENSO range of Common Rail injectors and is described as a series injector G2 with electromagnetic control.
Precise injection to preserve engine performance
In a Common Rail diesel engine, the fuel is kept under high pressure in the injection system. The engine control unit then commands the injectors to determine precisely when and how the fuel should be injected.
THE DENSO 095000-5600 It plays a direct role in this process. Proper atomization ensures better fuel distribution in the combustion chamber and contributes to smooth engine operation.
An injector with significant wear or malfunction can, on the contrary, disrupt combustion and cause various symptoms.
The main advantages of 095000-5600
Precise fuel injection
The Common Rail design of the injector allows for precise fuel metering when the injection system is operating under its intended conditions.
Contribution to efficient combustion
Proper diesel atomization promotes more even combustion and contributes to engine performance.
Regular motor response
A properly functioning injector contributes to a more stable engine response during acceleration and load variations.
Injection system protection
Using an injector adapted to the engine configuration helps to preserve the operation of the Common Rail system.
Mitsubishi Applications
References 095000-5600 And 1465A041 are associated with applications Mitsubishi, in particular the L200 / Triton equipped with the engine 4D56. Some parts databases also indicate L200 2.5 DI-D applications depending on the year and configuration.
Attention : Exact compatibility depends on the engine, year, vehicle configuration, and injection system. Therefore, it is recommended to compare the part number of the installed injector before ordering.
Technical specifications
| Characteristic | Value |
|---|---|
| Main reference | 095000-5600 |
| Mitsubishi Reference | 1465A041 |
| Associated DENSO reference | DCRI105600 |
| Brand | DENSO |
| Kind | Common Rail Diesel Injector |
| Order | Electromagnetic |
| Series | G2 |
| Main application | Mitsubishi |
| associated engine | 4D56 depending on application |
| System | Common Rail |
Cross-references 095000-5600 / 1465A041 / DCRI105600 are confirmed by several specialized catalogues.
What are the signs of a faulty injector?
A worn or faulty diesel injector can cause various symptoms:
- Difficult start
- Irregular slowdown
- Loss of power
- Less responsive acceleration
- Excessive smoke
- Abnormal fuel consumption
- Engine vibrations
- Irregular operation
- Unusual combustion noises
- Possible occurrence of electronic defects
These symptoms alone, however, are not sufficient to condemn the injector. Common Rail system diagnostics and, if necessary, a bench test is recommended before replacement.
The importance of fuel quality
Common rail injectors operate within very precise tolerances. Fuel contamination by water, particles, or other impurities can accelerate their wear.
For this reason, the maintenance of fuel filter is essential. It is also recommended to avoid using contaminated fuel and to keep the fuel system clean.
Proper maintenance of the injection system helps to extend the operating life of the injectors and maintain engine performance.
Tips for replacement
Before installing the 095000-5600, It is advisable to check:
- The reference number inscribed on the old injector
- The Mitsubishi benchmark 1465A041
- The engine installed on the vehicle
- The state of the Common Rail system
- The fuel filter
- High-pressure connections
- Electrical connections
- Sealing gaskets
- The condition of the injector seat
After installation, the system must be checked according to the procedures specified for the vehicle. Depending on the system configuration, a coding or learning procedure may also be required.
An ideal solution for professional diesel maintenance
THE DENSO 095000-5600 is particularly interesting for garages specializing in diesel injection, automotive mechanics workshops and professionals working on the Mitsubishi vehicles concerned.
A correctly identified reference helps reduce the risk of error during replacement and facilitates the search for parts in professional stocks.
10 good reasons to choose 095000-5600
- Reference DENSO 095000-5600
- Mitsubishi Reference 1465A041
- Related reference DCRI105600
- Diesel injector Common Rail
- Electromagnetic technology
- Series G2
- Precise fuel injection
- Mitsubishi application depending on configuration
- Suitable for maintenance operations on the injection system
- Professional solution for replacing a faulty injector
Ideal for professionals
- Car garages
- Diesel workshops
- Common Rail Injection Specialists
- Mechanics
- Mitsubishi Workshops
- Carriers
- Fleet managers
- Auto parts retailers
- Diagnostic workshops
- Engine repair professionals
Why choose the DENSO 095000-5600 injector?
L'’DENSO Injector 095000-5600 / 1465A041 It constitutes an essential component of the Common Rail injection system in compatible Mitsubishi applications. Its function is to provide precise fuel injection to contribute to the engine's proper operation, responsiveness, and combustion quality.
To ensure proper compatibility, it is strongly recommended to Check the reference 095000-5600 or 1465A041 directly on the existing injector and to confirm the engine and vehicle before ordering.
Reviews
There are no reviews yet.