Truck Explorer Revolution kit is best for the specialists who just starting work with trucks. It has popular functions to work over OBD. If you prefer to work on the bench also, please choose a Standard V6 kit.<\/p>\n
Support and updates for 12 months are included.
\nWarranty for hardware 12 months.
\nUpdated kit from 2019-04-01.<\/p>\n
Short description:<\/p>\n
Included licenses:<\/p>\n
1 MB MEMO PLD (MR) external FLASH & EEPROMs Read&Write; Checksum; Chip-tuning protection remove.
\n2 MB KEYS Key programming on PLD (MR). MR&FR IMMO OFF
\n3 MB CALC Calculates codes for VeDoc (algorithm X1, X2, X8); FDOK (XT, XN) algorithms
\n4 FR FR&CPC Flash EEPROM Read\/Write. OBD and DC2. CPC3 & CPC NAFTA not supported.
\n5 2011+ MEMO; KEYS; CALC; DC2 functionality with Continental PLD based on XC2xxx processor type. PLD firmware v.: 22B; 23E; 24B.
\n6 CRV S, ML, GL class CRV & CRV2 Flash&EEPROM R\/W via OBD
\n7 CR (CDI) V-class CR1 Flash & EEPROM R\/W; WSP<>CR pairing
\n8 MAN KEYS
\nKey programming on MAN FFR and PTM.
\nParring EDC with PTM, EDC with FFR, MS6 with FFR
\n9 SFTP DIAG MB SFTP (MP4) DTC Read \/Erase. Full report. OBD\/DC2
\n10 MB EXTRA Speed limit R\/W for PLD and FR; Torque limit R\/W; AdBlue error Erase
\n11 CPC3 EXTRA Speed limit R\/W for SFTP: MCM and CPC3;
\n12 MB DIAG Fault codes Read&Erase; All code descriptions are up to date
\n13 Android Truck Explorer Android 2.1 license
\n14 Update\/support 12 months updates & support subscription<\/p>\n
Included hardware:<\/p>\n
1 VEI V6 device
\n2 USB A to USB B
\n3 OBD2F-4-MB14 (MB) adapter
\n4 OBD2F-4-MN12 (MAN) adapter<\/p>\n
1. License MB MEMO
\nThe license allows to Read\/Write FLASH and EEPROMs of MR (PLD) control unit.
\nIt is possible to connect to the unit via:
\n– OBD (MR is mounted inside the truck) or
\n– direct connection with DirectConnect 2M tool (MR is placed on your table).<\/p>\n
This function is especially useful for chip tuning works and recovering unit after the broken update. All operations are done via OBD, there is no need to decapsulate\/open the unit, so unit stays in factory condition and therefore no warranty is voided.
\nThis function allows cloning MR. You read one MR, save to *.bin file, and write it to another MR.<\/p>\n
2. License MB KEYS
\nMB Keys learn – allows to add new keys for the truck over OBD (MR (PLD) control unit). No additional equipment is used, all operations are done offline, the only connection to the truck required.
\nIt is possible to add a new key, erase old keys, while connected to the unit via:
\n– OBD (MR is mounted inside the truck) or
\n– direct connection with DirectConnect 2M tool (MR is placed on your table).
\nDisable immobilizer in FR and MR. IMMO OFF.<\/p>\n
3. License MB CALC
\nMB VeDoc and FDOK calculators – calculates access codes for VeDoc (X1, X2, X8) and FDOK (XT, XN, XS) algorithms for MR (PLD) control unit.
\nMust be used together with XENTRY (DAS) software and compatible diagnostic tool where these codes are asked. All operations are done offline. The only connection to the truck required for VEDOC.
\nFor FDOK calculations not needed connection to the truck. FDOK code for new and old DAS.
\nDAS password generator – calculates password asked by DAS to access some special functions (MR downgrade from Euro 4, 5 to Euro 3 etc. Disable AdBlue)<\/p>\n
4. License FR
\nThe license allows accessing FR memory. Supported FMR; FR; FR\/CPC; CPC1EU; CPC2EU. Immo off in FR.
\nNot supported: CPC2 NAFTA; CPC2+ NAFTA; CPC4 NAFTA; CPC3; ADM2; ADM3.<\/p>\n
5. License 2011+
\nFor PLD memory read and write operation (category memo) PLD with XC2287 secured microprocessor. The license allows accessing firmware 22B, 23E, 24B from the 2011 year.
\nContinental Euro5 PLD: (MCU XC2287 (flash 768kB), 1 EEPROM M95640).
\nNeeded: MB MEMO license<\/p>\n
6. License CRV
\nThe license allows to Read\/Write FLASH & EEPROMs of CRV1 & CRV2 engine control unit of Mercedes S, ML, GL class via OBD2.<\/p>\n
7. License CR (CDI)
\nThe license allows to Read\/Write FLASH & EEPROMs of CDI engine control unit used in MB V-class, Sprinter and Vito via the diagnostic port. CDI<>WSP pairing.<\/p>\n
8. License MAN KEYS
\nKey programming for MAN truck with FFR or PTM over OBD or DC2.
\nNo master key, no additional equipment is required. All operations are done offline, the only connection to the truck is required.
\nParing by OBD: EDC7+FFR, EDC7+PTM, MS6.x+FFR
\nParing by DC2: EDC7+FFR, EDC7+PTM (cables not included)
\nModels: TGA; TGL; TGM; TGX; TGS
\nYears: 1999 – 2014<\/p>\n
9. License SFTP DIAG
\nSFTP truck DTC Read\/Erase. Full report in PDF format.
\nDiagnostic is available by OBD or by DirectConnect 2M tool.
\nThe license is merged with MB DIAG license.
\nNOTE: SFTP – Strategic Future Truck Platform. Original name of MP4 EURO6 truck.<\/p>\n
10. License MB EXTRA
\nSpeed limit Read and Write for PLD and FR
\nThe torque limit R\/W
\nAdBlue error Erase<\/p>\n
11. License CPC3 EXTRA
\nSpeed limit R\/W for SFTP (MP4): MCM and CPC3.<\/p>\n
12. License DIAG
\nThe license allows to Read DTC with the error description on MP3 and SFTP (MP4) trucks.
\nClear DTC.
\nRead and Erase fault codes. Export a full report to PDF file.<\/p>\n
13. License Android
\nTruck Explorer Android 2.1 license. For phones (tablets) we created Android mobile app: “Truck Explorer” More simple, more useful. The license is included, but the software must be purchased in a Google Play store.<\/p>\n
14. Update\/support subscription.
\nUpdate\/support subscription for 12 months is included in a kit. After 12 months the device will work, but support and update would not be provided.<\/p>","protected":false},"excerpt":{"rendered":"
<\/p>\n